Concrete Densifying & Sealing
With concrete densifying and sealing, Harden a bare warehouse slab so it stops dusting, staining and wearing, without the cost or downtime of a full coating system.
Concrete densifying and sealing — what a bare slab costs you every year
Dusting that never stops
A bare slab sheds fine dust continuously onto inventory, racking and equipment. A silicate densifier reacts inside the concrete and hardens it, which cuts the dusting at source.
Oil and stain absorption
Untreated concrete absorbs oil and spills straight into the surface. Sealing adds stain resistance so spills sit on top long enough to be cleaned up.
Rising housekeeping bills
Surface wear and dust drive the cleaning budget up year after year. Hardening the slab is usually far cheaper than the coating system people assume they need.
Concrete densifying and sealing — a densifier and a sealer do different jobs
They get sold as one thing and they are not. One reacts chemically inside the slab, the other sits on the surface. Most warehouse floors want both.
What a densifier does
A lithium or sodium silicate densifier reacts inside the concrete and hardens the slab. It is not a film, so there is nothing on the surface to peel or wear through.
What a sealer adds
A sealer adds stain resistance on top of the hardened slab. Where the floor needs chemical resistance or a specific colour, a full coating is the better answer instead.
How a concrete densifying and sealing project runs
Site assessment
We walk the slab, check its condition, test for moisture where it matters, and give you a clear scope with no vague line items.
Surface preparation
The slab is cleaned and opened up as required so the densifier can penetrate rather than sitting on contamination.
Apply and react
The silicate densifier is applied and given time to react inside the concrete, hardening the slab from within.
Same-day return
Because there is no film to cure, floors typically return to service the same day.
Where we provide concrete densifying and sealing
All West Surface Prep is based in Commerce City, Colorado and works across Colorado, Wyoming, Utah, Arizona, New Mexico and South Dakota. For Denver metro projects specifically, see our concrete densifying and sealing in Denver page.
Our shop sits in Commerce City, inside the metro. For Denver building types, access and scheduling, see concrete densifying and sealing in Denver.
Colorado60 cities
New Mexico7 cities
South Dakota6 cities
Concrete densifying and sealing — common questions about densifying and sealing
How quickly can we use the floor?
Usually the same day. Because a densifier reacts inside the concrete rather than forming a film, there is no coating cure to wait out.
Will this stop the floor dusting?
That is the main reason it gets specified. Hardening the surface cuts the dusting that a bare slab produces continuously.
Is this cheaper than a coating?
Generally yes, and with far less downtime. It suits facilities that want a harder, cleaner bare slab rather than a coated floor.
Do we still need a sealer?
If stain resistance matters, yes. The densifier hardens the slab; the sealer is what resists oil and spills on top of it.
Get a concrete densifying and sealing quote
Send the facility type, the approximate square footage and whether the floor is dusting or staining. You will hear back the same business day.
For specification guidance on curing and sealing compounds, see the American Concrete Institute.